OTC 7832 Torsion Bar Unloader for General Motors Hose Length_25' 13/16" Spark Plug Socket

13/16" Spark Plug Socket

Note: fractional gear loss = 6 %

tablets and other portable electronics

1/4” and 3/8” drive bit holders

Ultracapacitor power supply

OTC 7832 Torsion Bar Unloader for General Motors Hose Length_25' 13/16" Spark Plug SocketWhen servicing the lower control arm of the front suspension on General Motors trucks, or replacing a torsion bar, it is necessary to remove the spring pressure from the suspension In order to do this, a clamp, called a torsion bar unloader, can be positioned on the frame and the torsion bar mount The drive screw of the torsion bar unloader is tightened, removing pressure on the torsion bar mount The mount can then be removed along with the torsion bar